:	Aug 23, 2004

.

Disconnect the battery ground cable.

.

Remove the intake manifold casting.

.

:   Note the fitted position. Release the purge valve from the mounting bracket.   Remove the bolt.

.

: Before disconnecting or removing the components, ensure the area around the joint faces and connections are clean. Plug open connections to prevent contamination. Remove the purge valve.   Disconnect the 2 hoses.   Disconnect the electrical connector.

.

Connect the purge valve.   Connect the hoses.   Connect and secure the electrical connector.

.

:   Align to the position noted on removal. Install the purge valve, align the peg and tighten the bolt to 6 Nm (4 lb.ft).

.

Install the intake manifold casting.

.

Connect the battery ground cable.